Application | Catogory | Grade | Key performance feature | Equivalent to | Similar to |
![]() |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG, improving flowability | Dabco BL-11, Niax A-1,Jeffcat ZF-22 | |
MOFAN 5 | Strong urea reaction, blowing amine catalyst, improving flowability | Polycat 5, Niax C-5, Jeffcat PMDETA | |||
MOFAN 8 | Widely applicable urethane reaction, gelling amine catalyst | Polycat 8,Niax C-8, Jeffcat DMCHA | |||
MOFAN BDMA | Improve foam brittleness and adhesion | Dabco BDMA, Jeffcat BDMA | |||
MOFAN 46 | Standard potassium acetate-based trimerisation catalyst, fast curing to shorten demould time | Polycat 46 | |||
MOFAN 41 | Moderately active curing amine catalyst with excellent gelling capability. Fast curing to shorten demould time | Polycat 41, Niax C-41, Jeffcat TR-90 | |||
MOFAN TMR-2 | Quarternary ammonium-based, delayed action trimerization & fast curing catalyst. | Dabco TMR-2 | |||
Silicon surfactants | SI-3665 | Improves surface finish and flow around obstructions for HC-blown systems. | B-84813 | ||
SI-3635 | Improves energy efficiency for HFC/HFO or HFO/HC co-blown formulations. | L-6635, B-8443, AK8861 | |||
![]() ![]() Discontinous panel |
Catalysts | MOFAN 5 | Strong urea reaction, blowing amine catalyst | Polycat 5, Niax C-5, Jeffcat PMDETA | |
MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |||
MOFAN 8 | Widely applicable urethane reaction, gelling amine catalyst | Polycat 8,Niax C-8, Jeffcat DMCHA | |||
MOFAN 41 | Moderately active curing amine catalyst with excellent gelling capability.Recommended for use as a co-catalyst. | Polycat 41, Niax C-41, Jeffcat TR-90 | |||
MOFAN TMR-2 | Quarternary ammonium-based, delayed action trimerization & fast curing catalyst. | Dabco TMR-2 | |||
MOFAN TMR-3 | Quarternary ammonium-based, strongly delayed action trimerization catalyst. | Dabco TMR-3 | |||
MOFAN BDMA | Improve foam brittleness and adhesion | Dabco BDMA, Jeffcat BDMA | |||
MOFAN 46 | Standard potassium acetate-based trimerisation catalyst | Polycat 46 | |||
MOFAN 42 | Fast curing &trimerisation catalyst, and delayed geling for polyester system. Recommended for B2 Class foam | Featured products | |||
MOFAN 43 | Fast curing &trimerisation catalyst, and delayed geling for polyester system. Recommended for B1 Class foam | Featured products | |||
MOFAN L90 | Delayed geling for polyester system, In order to establish a new balance. | Featured products | |||
MOFAN K15 | Standard potassium octoate-based trimerization catalyst. | Dabco K-15 | |||
Silicon surfactants | SI-3633 | Improved surface quality for HC-blown PIR system (MDI compatible). | L-6900 | ||
SI-3618 | Promotes smooth and uniform surface quality for 100% polyester polyols and high index formulation | ||||
SI-5716 | Nonhydrolytic surfactant with cell-open action, apply ot cell open foam and PIR foam | L6816 | |||
![]() ![]() Spray foam |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |
MOFAN 5 | Strong urea reaction, blowing amine catalyst | Polycat 5, Niax C-5, Jeffcat PMDETA | |||
MOFAN 9 | Low odor, non-reactive amine with balanced urethane/urea reaction bias. Can be used as a co-catalyst with strong blow and gel amine catalysts to balance the reaction and provide a smooth rise profile. | Polycat 9 | |||
MOFAN41 | Moderately active curing amine catalyst with excellent gelling capability. Recommended for use as a co-catalyst. | Polycat 41, Niax C-41, Jeffcat TR-90 | |||
MOFAN TMR-2 | Quarternary ammonium-based, delayed action trimerization & fast curing catalyst. | Dabco TMR-2 | |||
MOFAN TMR-30 | Amine-based, delayed action gelation/trimerization catalyst. | Dabco TMR-30 | |||
MOFAN BDMA | Improve foam brittleness and adhesion | Dabco BDMA, Jeffcat BDMA | |||
MOFAN T12 | Strong urethane reaction (gelation) catalyst with good resin-side hydrolytic stability | Dabco T12, Niax D-22 | |||
MOFAN 46 | Standard potassium acetate-based trimerisation catalyst | Polycat 46 | |||
MOFAN K15 | Standard potassium octoate-based trimerization catalyst. | Dabco K-15 | |||
Silicon surfactants | SI-3609 | Industry standard rigid foam surfactant. Provides excellent flammability performance in rigid foams. | AK-8806 | ||
SI-6931 | Surfactant providing improved FR for use with water, HFCs, and HFOs. | AK-8804 | |||
![]() |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |
MOFAN 5 | Strong urea reaction, blowing amine catalyst | Polycat 5, Niax C-5, Jeffcat PMDETA | |||
MOFAN 9 | Low odor, non-reactive amine with balanced urethane/urea reaction bias. Can be used as a co-catalyst with strong blow and gel amine catalysts to balance the reaction and provide a smooth rise profile. | Polycat 9 | |||
MOFANCAT T | Robust reactive amine which is more selective to the urea (blowing) reaction catalysis. It can be used in flexible and rigid polyurethane systems where a smooth blowing profile is required. Non-emissive. | Dabco T, Jeffcat Z-110 | |||
MOFAN DMAEE | Low odor surface curing catalyst, used with 33LV and other major base catalysts | Dabco DMAEE, Jeffcat ZR-70 | |||
Silicon surfactants | SI-3908 | Nonhydrolytic surfactant | |||
SI-8872 | Nonhydrolytic surfactant | B8443 | |||
![]() |
Catalysts | MOFAN 5 | Strong urea reaction, blowing amine catalyst | Polycat 5, Niax C-5, Jeffcat PMDETA | |
MOFAN 9 | low ordor catalyst, can replace DMCHA | Polycat 9 | |||
MOFAN41 | Moderately active curing amine catalyst with excellent gelling capability. Recommended for use as a co-catalyst. | Polycat 41, Niax C-41, Jeffcat TR-90 | |||
MOFAN 46 | Standard potassium acetate-based trimerisation catalyst | Polycat 46 | |||
MOFAN 33LV | Standard gel catalyst based on Triethylenediamine in DPG | Dabco 33LV,Niax A-33, Jeffcat TD-33A | |||
Silicon surfactant | SI-1605 | Reduce pore and improve surface smoothness | |||
![]() |
Catalysts | MOFAN DMDEE | Suitable for single component sealing foam, and MDI phase dissolution without reaction | Dabco DMDEE, Jeffcat DMDEE | |
Silicon surfactants | SI-3973 | Moderate cell opener providing good surface and adhesion. | B-8871 | L-5352 | |
SI-3972 | Nonhydrolytic surfactant with cell-open action. | B-8870 | |||
![]() |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |
MOFAN 33LV | Standard gel catalyst based on Triethylenediamine in DPG |
Dabco 33LV, Niax A-33, Jeffcat TD-33A | |||
MOFAN DPA | Low odor reactive gel catalyst is mainly used to prepare polyurethane foam with high odor requirement | Jeffcat DPA | |||
MOFAN DMEA | Moderately active blowing catalyst with broad processing lattitude | Dabco DMEA, JeffcaT DMEA | |||
MOFAN SMP | Well-balanced catalyst with broad processing latitude, especially for low densities, providing additional hardening effect | TEGOAMIN® SMP | |||
MOFAN T9 | Stannous octoate | Dabco T-9, Niax D-19 | |||
MOFAN T12 | Strong urethane reaction (gelation) catalyst with good resin-side hydrolytic stability | Dabco T-12, Niax D-22 | |||
Silicon surfactants | SI-560 | High potent stabilizer for foams with physical blowing agent. | L-580 | ||
SI-550 | Broad processing latitude and fine cell structure. | L-618 | |||
![]() |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |
MOFAN 33LV | Standard gel catalyst based on Triethylenediamine in DPG |
Dabco 33LV, Niax A-33,Jeffcat TD-33A | |||
MOFAN T12 | Strong urethane reaction (gelation) catalyst with good resin-side hydrolytic stability | Dabco T-12, Niax D-22 | |||
MOFAN DPA | Low odor reactive gel catalyst is mainly used to prepare polyurethane foam with high odor requirement | Jeffcat DPA | |||
MOFAN 77 | Balanced gelation and blowing catalyst that can promote open cells in some applications. | Polycat 77, Jeffcat ZR-40 | |||
MOFANCAT 15A | Isocyanate-reactive, balanced urethane/urea reaction catalyst. Promotes surface cure. | Polycat 15 | |||
MOFAN A300 | Non-emissive reactive blowing catalyst | Dabco NE300 | |||
Hardened agent | MOFAN 109 | High efficiency crosslinking agent, reduce POP dosage and maintain high hardness | Featured products | Niax FH-400 | |
Silicon surfactants | SI-8001 | High efficiency silicone for MDI or MDI/TDI HR molded foam | DC-2525, 6070 | ||
SI-80366 | Works well in all types of HR systems, including of polyester polyol based formulation | Y-10366 | |||
Cell opener | MOFAN 1421 | Cell opener | Voranol 1421 | ||
MOFAN 28 | Cell opener | Featured products | |||
Eliminate formaldehyde agent | MOFAN 575 | Eliminate 80%~85% formaldehyde and acetaldehyde of Polyol component | Featured products | FM505, AS6 | |
![]() |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |
MOFAN 33LV | Standard gel catalyst based on Triethylenediamine in DPG |
Dabco 33LV, Niax A-33, Jeffcat TD-33A | |||
MOFAN DPA | Low odor reactive gel catalyst is mainly used to prepare polyurethane foam with high odor requirement | Jeffcat DPA | |||
MOFAN T-9 | Stannous octoate | Dabco T-9, Niax D-19 | |||
MOFAN T-12 | Strong urethane reaction (gelation) catalyst with good resin-side hydrolytic stability | Dabco T-12, Niax D-22 | |||
MOFAN A300 | Non-emissive reactive blowing catalyst | Dabco NE300 | |||
Cell opener | MOFAN 1300 | Cell opener | Featured products | ||
Hardened agent | MOFAN 109 | High efficiency crosslinking agent, reduce POP dosage and maintain high hardness | Featured products | Niax FH-400 | |
Silicon surfactants | SI-8002 | Improve frothing stability in low density viscoelastic foam (D30-D40) with broad formulation latitude. | B-8002 | ||
SI-5825 | Low potency silicone, provide open cell structure for viscoelastic molded foam | ||||
SI-5782 | High potency silicone for viscoelastic molded foam | ||||
![]() |
Catalysts | MOFAN EG | Industry standard gel catalyst for MEG extended systems | Dabco EG, Niax A-533 | |
MOFAN 25S | Industry standard gel catalyst for BDO extended systems | Dabco 25S, | |||
MOFAN A-1 | Industry standard blowing catalyst to improve foam flowability especially in low density applications | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |||
MOFAN 1027 | Delayed action co-catalyst for MEG extended systems giving improved flowability and/or faster demold | Dabco 1027 | |||
MOFAN 1028 | Delayed action co-catalyst for BDO extended systems for improved flowability and/or faster demold | Dabco 1028 | |||
MOFAN 1029 | Delayed action co-catalyst for MEG extended systems giving improved flowability | Dabco 1029 | |||
Silicon surfactant | SI-693 | Potent cell regulator providing fine and uniform cell structure; improves tensile strength and Ross-Flex properties | DC-193 | ||
![]() |
Catalysts | MOFAN A-1 | Standard blowing catalyst based on Bis(2-dimethylaminoethyl)ether in DPG,improving flowability | Dabco BL-11, Niax A-1, Jeffcat ZF-22 | |
MOFAN 33LV | Standard gel catalyst based on Triethylenediamine in DPG |
Dabco 33LV, Niax A-33, Jeffcat TD-33A | |||
MOFAN 8054 | Delayed action co-catalyst for full-water blowing agent application | Featured products | |||
Silicon surfactant | SI-5306 | Eecellent cell openning & Good surface performance | DC-2525 |