| Number | Mofan Grade | Chemical Name | Chemical structure | Molecular weight | CAS Number | Equivalent to |
| 1 | MOFAN TMR-30 | 2,4,6-Tris(Dimethylaminomethyl)phenol |  |
265.39 | 90-72-2 | DABCO TMR-30; JEFFCAT TR30; RC Catalyst 6330 |
| 2 | MOFAN 8 | N,N-Dimethylcyclohexylamine |  |
127.23 | 98-94-2 | POLYCAT 8; JEFFCAT DMCHA |
| 3 | MOFAN TMEDA | N,N,N’,N’-Tetramethylethylenediamine |  |
116.2 | 110-18-9 | JEFFCAT TMEDA,Kaolizer 11 Propamine D Tetrameen TMEDA Toyocat TEMED |
| 4 | MOFAN TMPDA | 1,3-bis(Dimethylamino)propane |  |
130.23 | 110-95-2 | TMPDA |
| 5 | MOFAN TMHDA | N,N,N’,N’-Tetramethyl-hexamethylenediamine |  |
172.31 | 111-18-2 | TMHDA; Kaolizer 1 Minico TMHD Toyocat MR U 1000 |
| 6 | MOFAN TEDA | Triethylenediamine |  |
112.17 | 280-57-9 | TEDA; DABCO Crystal; RC Catalyst 105; JEFFCATTD－100;TOYOCAT TEDA; RC Catalyst 104 |
| 7 | MOFAN DMAEE | 2(2-Dimethylaminoethoxy)ethanol |  |
133.19 | 1704-62-7 | PAK-LOC V; JEFFCAT ZR-70;C-174,polycat 37, |
| 8 | MOFANCAT T | N-[2-(dimethylamino)ethyl]-N-methylethanolamine |  |
146.23 | 2212-32-0 | DABCO T; TOYOCAT RX5,JEFFCAT Z-110,Lupragen N400,PC CAT NP80 |
| 9 | MOFAN 5 | N,N,N’,N’,N”-Pentamethyldiethylenetriamine |  |
173.3 | 3030-47-5 | POLYCAT 5; TOYOCAT DT; JEFFCAT PMDETA |
| 10 | MOFAN A-99 | bis(2-Dimethylaminoethyl)ether |  |
160.26 | 3033-62-3 | NIAX A-99; DABCO BL-19; TOYOCAT ETS; JEFFCAT ZF-20;RC Catalyst 6433,Texacat ZF 20 Niax A 1 Toyocat ET Kalpur PC Kaolizer 12P Minico TMDA Dabco BL1 |
| 11 | MOFAN 77 | N-[3-(dimethylamino)propyl]-N,N’,N’-trimethyl-1,3-propanediamine |  |
201.35 | 3855-32-1 | POLYCAT 77; JEFFCAT ZR40; |
| 12 | MOFAN DMDEE | 2,2’-dimorpholinodiethylether |  |
244.33 | 6425-39-4 | Jeffcat DMDEE Texacat DMDEE |
| 13 | MOFAN DBU | 1,8-diazabicyclo[5.4.0]undec-7-ene |  |
152.24 | 6674-22-2 | POLYCAT DBU; RC Catalyst 6180 |
| 14 | MOFANCAT 15A | Tetramethylimino-bis(propylamine) |  |
187.33 | 6711-48-4 | POLYCAT 15; JEFFCAT ZR-50B |
| 15 | MOFAN 12 | N-Methyldicyclohexylamine |  |
195.34 | 7560-83-0 | POLYCAT 12 |
| 16 | MOFAN DPA | N-(3-Dimethylaminopropyl)-N,N-diisopropanolamine |  |
218.3 | 63469-23-8 | JEFFCAT DPA,TOYOCAT RX4 |
| 17 | MOFAN 41 | 1,3,5-tris[3-(dimethylamino)propyl]hexahydro-s-triazine |  |
342.54 | 15875-13-5 | POLYCAT 41; JEFFCAT TR41; TOYOCAT TRC; RC Catalyst 6099;TR90 |
| 18 | MOFAN 50 | 1-[bis(3-dimethylaminopropyl)amino]-2-propanol |  |
245.4 | 67151-63-7 | JEFFCAT ZR-50,PC CAT NP 15 Texacat ZR 50 |
| 19 | MOFAN BDMA | N,N-Dimethylbenzylamine |  |
135.21 | 103-83-3 | Dabco BDMA，Jeffcat BDMA，Lupragen N103，PC CAT NP60,Desmorapid DB Kaolizer 20 Araldite Accelerator 062 BDMA |
| 20 | MOFAN TMR-2 | 2-HYDROXYPROPYLTRIMETHYLAMMONIUMFORMATE |  |
163.21 | 62314-25-4 | Dabco TMR-2 |
| 21 | MOFAN DMDEE | 2,2'-dimorpholinyldiethyl ether |  |
244.33 | 6425-39-4 | Jeffcat DMDEE Texacat DMDEE |
| 22 | MOFAN A1 | 70% Bis-(2-dimethylaminoethyl)ether in DPG | - | - | - | Dabco BL-11 Niax A-1 Jeffcat ZF-22 Lupragen N206 Tegoamin BDE PC CAT NP90 RC Catalyst 108 Toyocat ET |
| 23 | MOFAN 33LV | so1ution of 33%triethy1enediamice | - | - | - | Dabco 33-LV Niax A-33 Jeffcat TD-33A Lupragen N201 Tegoamin 33 PC CAT TD33 RC Catalyst 105 TEDA L33 |
-
![N-[3-(dimethylamino)propyl]-N, N’, N’-trimethyl-1, 3-propanediamine Cas#3855-32-1](https://cdn.globalso.com/mofanpu/MOFAN-77.jpg)
N-[3-(dimethylamino)propyl]-N, N’, N’-trimethyl-1, 3-propanediamine Cas#3855-32-1
Description MOFAN 77 is a tertiary amine catalyst that can balance the reaction of urethane (polyol-isocyanate) and urea (isocyanate-water) in various flexible and rigid polyurethane foams; MOFAN 77 can improve the opening of flexible foam and reduce the brittleness and adhesion of rigid foam; MOFAN 77 is mainly used in the production of car seats and pillows, rigid polyether block foam. Application MOFAN 77 is used for automative interiors, seat, cell open rigid foam etc. ... -
![1,8-diazabicyclo[5.4.0]undec-7-ene Cas# 6674-22-2 DBU](https://cdn.globalso.com/mofanpu/MOFAN-DBU.jpg)
1,8-diazabicyclo[5.4.0]undec-7-ene Cas# 6674-22-2 DBU
Description MOFAN DBU a tertiary amine that strongly promotes the urethane (polyol-isocyanate) reaction in semi-flexible microcellular foam, and in coating, adhesive, sealant and elastomer applications. It displays very strong gelation capability, imparts low odor and is used in formulations containing aliphatic isocyanates as they require exceptionally strong catalysts because they are much less active than aromatic isocyanates. Application MOFAN DBU is in semi-flexible microcellu... -
Pentamethyldiethylenetriamine (PMDETA) Cas#3030-47-5
Description MOFAN 5 is high active polyurethane catalyst, mainly used in the fasting, foaming, balance the overall foaming and gel reaction. It is widely used in the polyurethane rigid foam including PIR panel. Because of strong foaming effect, it can improve the foam liquidity and product process, compatible with DMCHA. MOFAN 5 also can compatible with other catalyst except polyurethane catalyst. Application MOFAN5 is refrigerator, PIR laminate boardstock, spray foam etc. MOFAN 5 can also be... -
N-Methyldicyclohexylamine Cas#7560-83-0
Description MOFAN 12 acts as a co-catalyst to improve cure. It is n-methyldicyclohexylamine suitable for rigid foam applications. Application MOFAN 12 is used for polyurethane block foam. Typical Properties Density 0.912 g/mL at 25 °C(lit.) Refractive index n20/D 1.49(lit.) Fire point 231 °F Boiling Point/Range 265°C / 509°F Flash Point 110°C / 230°F Appearance liquid Commercial specification Purity, % 99 min. Water content, % 0.5 max. Pack... -
bis(2-Dimethylaminoethyl)ether Cas#3033-62-3 BDMAEE
Description MOFAN A-99 is widely used in flexible polyether slabstock and moulded foams using TDI or MDI formulations. It can be used alone or with other amine catalyst to balance the blowing and gelation reactions.MOFAN A-99 gives rapid cream time and is recommended for use in partially water-blow rigid spray foams.It is a power catalyst for the isocyanate-water reaction and has applications in certain moisture-cured coatings,caukls and adhesives Application MOFAN A-99, BDMAEE pri... -
N,N-Dimethylcyclohexylamine Cas#98-94-2
MOFAN 8 is low viscosity Amine catalyst, Acts as a widely used catalyst. Applications of MOFAN 8 include all types of rigid packaging foam.
-
70% Bis-(2-dimethylaminoethyl)ether in DPG MOFAN A1
Description MOFAN A1 is a tertiary amine which has a strong influence on the urea (water-isocyanate) reaction in flexible and rigid polyurethane foams. It consists of 70% bis(2-Dimethylaminoethyl) ether diluted with 30% dipropylene glycol. Application MOFAN A1 catalyst can be used in all types of foam formulations. The strong catalytic effect on the blowing reaction can be balanced by the addition of a strong gelling catalyst. If amine emissions are a concern, low emission alternati... -
Triethylenediamine Cas#280-57-9 TEDA
Description TEDA Crystalline catalyst is used in all types of polyurethane foams including flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric. It is also used in polyurethane coatings applications.TEDA Crystalline catalyst accelerates the reactions between the isocyanate and water, as well as between the isocyanate and organic hydroxyl groups. Application MOFAN TEDA is used in flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric. It is als... -
Solution of 33%triethylenediamice, MOFAN 33LV
Description MOFAN 33LV catalyst is a strong urethane reaction (gelation) catalyst for multipurpose use. It is 33% triethylenediamine and 67% dipropylene glycol. MOFAN 33LV has low-viscosity and is used in adhesive and sealant applications. Application MOFAN 33LV is used in flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric. It is also used in polyurethane coatings applications. Typical Properties Color(APHA) Max.150 Density, 25℃ 1.13 ... -
![2-[2-(dimethylamino)ethoxy]ethanol Cas#1704-62-7](https://cdn.globalso.com/mofanpu/MOFAN-DMAEE.jpg)
2-[2-(dimethylamino)ethoxy]ethanol Cas#1704-62-7
Description MOFAN DMAEE is a tertiary amine catalyst for the production of polyurethane foam. Because of high blowing activity, it is particularly well suited for use in formulations with a high water content, such as formulations for low-density packaging foams. The amine odor which is often typical for foams is reduced to a minimum by chemical incorporation of the substance in the polymer. Application MOFAN DMAEE is used for ester based stabstock flexible foam, microcellulars, elastomers, ...